PRODUCTS
Product Categories
Product Name:
Fill in the eye gaps
Single-component putty offers excellent filling performance, dries quickly, and is easy to apply and sand. It’s ideal for repairing minor scratches, dust spots, and pinholes. *(Note: Applying too thickly may compromise interlayer adhesion, so it should not be used as a substitute for an intermediate coating.)*
Category:
Contact email:
Product details:
Fill in the eye gap
Technical specifications
Construction mix ratio: No mixing required—use it directly.
Take out small amounts as needed during use (gently scrape multiple times, adjusting according to the size of scratches and pits).
|
Testing Items |
Test Results |
Testing Standards |
Note |
|
Material Status |
Mud-yellow gray body, no hard lumps |
GB3186-82 |
Environment: T & H 25°C / 80% |
|
Viscosity |
12–12.5 cm |
GB1749-89 |
|
|
Workable Spreading Time |
Take out small amounts as needed during use. |
GB1727-92 |
|
|
Surface drying time |
3min |
GB1728-79 |
|
|
Time that can be polished |
10 min (wet grinding) 30 min (dry grinding) |
GB1728-79 |
|
Product Features and Suitable Substrates
- Applicable substrates: Old paint films and putty surfaces that have been fully hardened and sanded. Apply as a filler on either 1K or 2K intermediate coats. Primarily used for filling surface imperfections such as pinholes and scratches; (not recommended for exposed metal surfaces or large-area coatings.)
- Single-component putty offers excellent filling performance, dries quickly, and is easy to apply and sand. It’s ideal for repairing minor scratches, dust spots, and pinholes. *(Applying too thick a layer may compromise interlayer adhesion, so it should not be used as a substitute for an intermediate coating.)*
Construction Instructions
- Sand the substrate ready for puttying, removing grease and moisture.
- Apply directly by scraping, and apply multiple thin layers.
- Metal putty knives or rubber scrapers can be used for applying the material by scraping.
- After applying by scraping, allow it to harden before sanding (water-based sanding is recommended).
- Mud-yellow eye-patching putty is not suitable for large-area application;
- Mud-yellow eye shadow is not suitable for use on bare metal surfaces;
- For small-area applications, such as filling sand holes with mud-yellow eye-filling putty, you can proceed directly to the topcoat process after drying and sanding. However, for larger areas where mud-yellow eye-filling putty is applied by scraping, once dried and sanded, a mid-coat paint must be sprayed to seal, fill, and conceal the surface—helping to minimize absorption of solvents from the underlying layers into the topcoat and ensuring strong adhesion between layers.
- After activation, immediately tighten the can lid; otherwise, a crust will form on the surface of the filler powder inside, affecting its subsequent application by scraping.
- During bottom treatment work, if large or deep holes appear on the sanded putty surface, it is not recommended to apply mud-yellow eye-filling putty. Instead, use a high-pressure dust blower to thoroughly remove any dust and moisture from within the putty pores, followed by carefully pressing and compacting the putty into place for seamless filling. (This approach helps avoid risks such as shrinkage marks or bubbling in the putty layer.)
Important Notes
- Store in a cool, dry place, away from heat and ignition sources, and protect from direct sunlight.
- Shelf life: Store in a cool, dry place at 20°C. Unopened, with the original cap intact, it can be stored for up to 1 year.
The previous one
The next one
The previous one
The next one
Our strengths
The company boasts a dedicated, in-house R&D team and currently holds multiple invention and utility model patents. In 2012, the company played a key role in drafting the industry standard HG/T 4561-2013, "Unsaturated Polyester Putty." Additionally, in 2021, it contributed to the development of a national standard—GB/T 41953-2022, "Paints and Varnishes—Determination of Moisture Content in Coatings by Gas Chromatography"—as well as the revision of another national standard: GB/T 6739, "Paints and Varnishes—Determination of Film Hardness by Pencil Method." In the coming years, the company plans to actively collaborate with several universities and research institutions through industry-academia partnerships, fostering innovation and co-developing cutting-edge products tailored to meet both customer needs and market demands. At the same time, we will continue strengthening our intellectual property strategy, with an ongoing focus on applying for and securing recognition for advanced technology projects. This includes pursuing certifications such as National High-Tech Enterprise status, Zhaoqing City High-Tech Enterprise designation, Guangdong Provincial Engineering Technology Research Center accreditation, and Zhaoqing City Engineering Technology Research Center certification, among others.
Factory Strength
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Factory Strength
Exhibition and trade shows
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Here is placeholder text.
Exhibition and trade shows
Qualifications and Honors
RoHS 2.0 Certificate for Unsaturated Polyester Putty
Quality System Certificate
Environmental Management System Certificate
Specialized, Specialized, and New Small and Medium-Sized Enterprises
Guangdong Provincial Engineering Technology Research Center
Qingyuan City Engineering Technology Research and Development Center
High-Tech Enterprise Certificate 2024
High-Tech Enterprise Certificate 2023
Invention Patent (A Preparation Method for Polyester Resin Suitable for Sprayable Atomic Putty, Atomic Putty Itself, and Its Preparation Method)
Invention Patent (A Solvent-Resistant Mud Yellow Eyeshadow and Its Preparation Method – Invention Patent Certificate)
A scrape-coated mid-coat automotive coating based on thermoplastic acrylic resin and its preparation method – Invention Patent Certificate
A High-Speed Rail Atomic Primer and Its Preparation Method – Invention Patent Certificate
A Dual-Axis Mixing and Dispersion Device for Coating Production – Utility Model Patent Certificate
A Tail Gas Recovery and Treatment System for a Coating Production Workshop – Utility Model Certificate
A Fully Automatic Water-Based Coating Filling and Weighing System – Utility Model Certificate
A Water-Based Coating Dispersion Vessel with a Dual-Dispersion Stirrer Head – Utility Model Certificate
An Eco-Friendly Coating High-Speed Dispersion Device – Utility Model Certificate
Utility Model Patent Certificate – A High-Level Coating Tank
Utility Model Patent Certificate – A Device for Pouring from Iron Drums
Utility Model Patent Certificate – A Resin Raw Material Storage Tank
Certificate of Honor 2
Certificate of Honor 1
Certificate of Honor
Recommended Products
Product Inquiry
*Note: Please ensure you provide accurate information and keep the communication lines open. We’ll get back to you as soon as possible!
Developing high-quality coating solutions
Contact Us
Sihui Company Address:
No. 10 Chuangzhan 1st Street, Jianggu Fine Chemical Zone, Sihui City
Qingyuan Company Address:
No. 10 Jia Shun Road, Jin Fu Industrial Zone, Yin Zhan, Qingcheng District, Qingyuan City
Phone:86-763-3697988
International:86-180-2330-1776
Follow us
Product Center
Quick Links
About Us
Promotional Video
Product Center
Application
Smart Color Cube
Recipe Search
Contact Us
Consult now
Copyright © 2025 Guangdong Youzhi New Materials Co., Ltd. All rights reserved